ALUMINIUM AND MAGNESIUM ALLOYS FOR WELDING
Alloys based on Aluminium and Magnesium suitable for the TIG/MIG techniques.
Used to join aluminium and magnesium based metals
Some alloys are also suitable for the Brazing technique.
| Code | Composition % | Standard | Description | |||||||
| Al | Si | Mg | Mn | Zn | Zr | DIN 1732 | AWS A5.10 | |||
Aluminiumalloys |
||||||||||
| Al99,8 | 99,8 | SG-Al99,8 | 1080 | |||||||
| Al99,5 | 99,5 | SG-Al99,5 | 1050 |  |
||||||
| Al99,5 FC | 99,5 | SG-Al99,5 | 1050 | |
||||||
Aluminium-Silicon alloys |
||||||||||
| AlSi5 | Bal | 5 | SG-AlSi5 | 4043 | |
|||||
| AlSi5 FC | Bal | 4 | ~ SG-AlSi5 | ~ 4043 | |
|||||
| AlSi12 | Bal | 12 | SG-AlSi12 | 4047 | |
|||||
Aluminium-Magnesiumalloys |
||||||||||
| AlMg4,5Mn | Bal | 0.2 | 4.5 | 0.5-1 | SG-AlMg4,5Mn | 5183 | |
|||
| AlMg4,5MnZr | Bal | <0.4 | 4.5-5.2 | 0.7-1.1 | <0.25 | 0.1-0.2 | SG-AlMg4,5MnZr | 5087 | ||
| AlMg5 | Bal | 0.2 | 5 | 0.05-2 | SG-AlMg5 | 5356 | ||||
| AlMg5Mn | Bal | 0.3 | 5 | 0.6-1 | SG-AlMg5 | 5556 | ||||
| AlMg3 | Bal | 0.4 | 3 | 0.5 | SG-AlMg3 | 5754 | ||||
Magnesium |
||||||||||
| MgAl6Zn | 6 | Bal | 1 | AZ61A (AWS A5.19) | ||||||
| MgAl9Zn | 9 | Bal | 2 | AZ92A (AWS A5.19) | ||||||
| Make-up | ||||
 |
Rods | Ø; | 1,2 ÷ 5 mm | Length: 1.000 mm |
 |
Wires | Ø: | 0,8 ÷ 3,2 mm | On Spools DIN 300, DIN 200 and DIN 100 |
 |
Flux-cored rods & wires | Ø: | 2 ÷ 5 mm | Only Al99,5 – AlSi5 – AlSi12 |
 |
Rings | |||